10 Steps to Floor Sanding

Floor sanding is not really a DIY job. It is in fact a job for the professionals. Anyway just in case you want to know how to sand a wooden floor I will give you a a little guide to sanding and restoring wooden flooring.

First of all you will need to use a belt floor sandin g machine with a very coarse 36 grit on to remove all of the old seal and to level the floor. Always sand the floor going with the wood grain or at a 45 degrees angle to the grain.

Next you will need to start the smoothing process by using a 50 grit sanding belt. This will remove the scratches left by the previous 36 grit belt.

Next use a 80 grit sanding belt to remove the scratches left by the 50 grit sanding belt.

Next you will need a rotary sander or a buffer with a 100 grit or 120 grit disk to remove the fine scratches left by the 80 grit sanding belt. The buffer will leave the floor very smooth and prepare the floor for priming.

You will then need to apply a wood flooring base prime to prepare the wood floor for lacquering.

After you have primed the wooden floor you will then need to run the buffer machine over it with a 150 grit disk to remove any raised grain, leaving the floor very smooth.

Hoover the floor to remove all traces of dust and begin to roller on the lacquer of your choice e.g Bona or Junkers.

Next apply the second coat of lacquer after the first coat is dry.

You can then apply a third coat of lacquer if it is a high traffic area to protect the floor more.

You should then try your best to keep the floor free from any grit and dirt to keep the floor looking at its best for a longer period of time.

Floor sanding and restoring wooden flooring can transform a whole room from looking dull and dirty to looking new, fresh and very trendy. Wooden flooring is a very expensive material for flooring when you include the product and the installation cost, so it is therefore very beneficial to sand the floor and restore it as the cost is kept very low. Floor sanding again is a professional job so if you can help it do not try and start a floor on your own as it may end up ruining your beautiful wooden floor.

Real Wood Floor Installation

Real wood floor installation – how is it done? Using the latest techniques, its is possible to easily and efficiently fit, clean and restore wooden floors in a great cost-efficient way. Now it is possible to turn old, worn and abrasive wooden floor surfaces into stylishly and cleanly polished wooden floors that look like they come right out of the shop. We will look into how wooden floor fitting can be done best.

The best method of conducting a wooden floor fitting is by using state-of-the art fitting and sanding machines. The wooden floor sanding machines used to carry out wooden floor sanding in have seen many advances over the years, and the newest technologies allow for a virtually dust free floor sanding service to the customer. Also it's by far the most cost-effective solution to conduct such a modern and highly-polished wooden floor sanding installation.

The finishing work is done by using the absolute best quality wood sealers and a wide variety of colours mean that all customers can have exactly what they desire. Anyone interested in hiring a company in order to restore and sand their wooden floors are advised to take a look around town and on the internet for the best possible solution. People in need of a wooden floor maintenance operation have to be patient and compare both prices and services to come to a decision.

It is very important to make sure all the technicians are highly skilled craftsmen who have been working with wooden floors for a very long time. Only by selecting the best team and company for the job, customers can have confidence in both the workmanship and punctuality. A good company can't allow any bad recognition or any dents in their reputation, so keep that in mind. When you are unsure of the total costs of the operation, it is interesting to note that many companies offer a free quotation beforehand to evaluate the work needed.

It is also extremely important that wooden floor fitting companies use the very best equipment and the latest technology to perform a wooden floor sanding. The expert of choice in this case a floor sander, who will always look for the best solution in every situation. Floor sanders use very heavy floor machines since these machines give the best possible finish.

Floor sanders first have to evaluate the lipping in the wood floors. If there is much lipping then the wooden floor must first be sanded at 45 degrees to remove any unwanted lippage in the floor. When this has been done, floor sanders try to smooth out every bump they encounter and dispose of any scratches or dents in the floor. A sanding machine uses various sanding belts to get the smoothest end result.Then, a rooler or applicator is used to seal the wood and complete the process. In the end – when done well – professional wooden floor fitting will give a fantastic end result and deliver wooden floors with an incredible durability.

By: Daniel Lafferty

Article Directory: http://www.articledashboard.com

There are many ways to finish a wood floor, of course, but varathane wood floor finishing has been one of the most consistently popular and sought after ways to finish or refinish any kind of wood flooring.


One of the best things about varathane wood floor finishing is how easy this great finishing product is to install. The easy three step process takes only a matter of hours, but it can provide many years of beauty and trouble free performance from all brands of hardwood flooring.


No precleaning or sanding is necessary to use varathane wood floor finishing, and in fact the patented formula used by varathane actually does the job of a good sandpaper, without any of the hassle or the mess of actual sanding. In fact, the varathane process helps to eliminate common contaminents on the floor that may otherwise prevent the adhesion of the finishing product.


In addition to eliminating the need to sand the current hardwood floor, varathane wood floor finishing also provides a special chemical formula which helps to provide a receptive surface to allow the finish to be applied in a straightforward and effective manner.


The varathane wood floor finishing process also includes an excellent system for rebuilding damaged hardwood floors and helping them shine their best. The unique catalyzing formula used by varathane helps to permanently lock the original formula with a clear and beautiful finish that is also very hard and very durable.


There are a number of important advantages to be had by users of the wood floor finishing programs using varathane. For instance, the product will not alter the original color of the floor, it requires no sanding and no need to wear a dust mask, it requires no specialized equipment or tools and it features a low odor, eliminating the need for additional ventilation. When you use a varathane wood finishing product, the room is ready within 24 hours, and the process can be completed even by those with no hardwood floor refinishing experience.

Main Menu

• Sign Up
• Member Login
• Latest Published Articles
• Submission Guidelines
• Terms & Conditions
• Contact Us

Article Views: 597
Ezine ready page

Posted on April 1, 2006 by Alphonso Sirtle.. | Posted under Home Improvement

The beauty and power of varathane wood floor finishing

There are many ways to finish a wood floor, of course, but varathane wood floor finishing has been one of the most consistently popular and sought after ways to finish or refinish any kind of wood flooring.


One of the best things about varathane wood floor finishing is how easy this great finishing product is to install. The easy three step process takes only a matter of hours, but it can provide many years of beauty and trouble free performance from all brands of hardwood flooring.


No precleaning or sanding is necessary to use varathane wood floor finishing, and in fact the patented formula used by varathane actually does the job of a good sandpaper, without any of the hassle or the mess of actual sanding. In fact, the varathane process helps to eliminate common contaminents on the floor that may otherwise prevent the adhesion of the finishing product.


In addition to eliminating the need to sand the current hardwood floor, varathane wood floor finishing also provides a special chemical formula which helps to provide a receptive surface to allow the finish to be applied in a straightforward and effective manner.


The varathane wood floor finishing process also includes an excellent system for rebuilding damaged hardwood floors and helping them shine their best. The unique catalyzing formula used by varathane helps to permanently lock the original formula with a clear and beautiful finish that is also very hard and very durable.


There are a number of important advantages to be had by users of the wood floor finishing programs using varathane. For instance, the product will not alter the original color of the floor, it requires no sanding and no need to wear a dust mask, it requires no specialized equipment or tools and it features a low odor, eliminating the need for additional ventilation. When you use a varathane wood finishing product, the room is ready within 24 hours, and the process can be completed even by those with no hardwood floor refinishing experience.


About The Author:
Alphonso has been working in the home remodeling industry for last 5 years. Take advantage of his experience and written material on flooring ideas at his website at http://www.improve-home.com

http://www.articleclick.com

Wooden Floor Installation And Renovation

We specialise in floor sanding, wood floor restoration and wooden floor installation, we are not just an 'add on' service.Our dedicated team of experienced floor fitters carry out high quality wooden floor installation from sub floor preparation, installation and finishing.

Our wooden floor installation processes can replicate many classic floor or boarding construction styles.

We are now able to offer a total flooring solutions package being able to fit all types of commercial flooring including ceramic tiles, vinyl's and carpets as well as our wooden floor installation, floor sanding and sealing and court marking.

Whether you need a home improvement, house or flat refurbishment in London, new bathroom, a replacement kitchen, wooden floor installation or renovation, extension or loft conversion, internal or external complete refurbishment, then our name is for you!

Here are the main wooden floor types: Hardwood floors.

Hardwood flooring is available in both unfinished and pre-finished form. They are made up of geometrical patterns, composed of individual wooden slates held together by a mechanical fastening or adhesive. We sand and restore all wooden floors from floorboards to parquet floors, from a small domestic hall way to full size commercial sports halls, schools. We fit all wooden floors specialising in solid oak plank flooring / parquet flooring / re-claimed pine boards / new pine boards / block flooring / hardwood flooring / repairs / sanding in new floors / new to old.

Installing solid wood flooring. Before installing any wood floor you must first make sure the sub-floor is free of loose materials. Before you begin installing a floor, you should give careful consideration to the type of floor you want. Basically when it comes to how to install bamboo flooring, the installing procedure is pretty much the same as with conventional hardwood flooring. Make sure you read all installing instructions from the bamboo flooring manufacturer carefully, because humidity can backfire if it comes to any wooden floor installation.

Parquet flooring this has a very different look from typical hardwoods. All our floor fitters are experienced in all types of wood floor fitting such as: solid wood, laminate, engineered, reclaimed timber, pre finished, unfinished and all types of parquet. We can fit overlay, solid wood, engineered boards and the more specialized herringbone parquet blocks.

It is our particular expertise in Sanding and Refinishing floors, especially in the staining process, which gives us the edge to create individual and exquisite floors for you.

Our wooden floor installation processes can replicate many classic floor or boarding construction styles. Quality of subfloor installation Subfloor is one of the main elements of the wooden floor construction. A suitable floor installation construction should be used. For this reason, all wet construction works in the premises must be completed prior to installing wooden floor on heated or unheated subfloor. Additional factors influencing the use of heated wooden floor Use of wooden floor is influenced by the following additional factors: timber species; method of wood cutting; and wooden floor construction

By: Ovidiu Diaconu

Article Directory: http://www.articledashboard.com

What is a Floating Floor?

What is a floating floor? This is a question that many do-it-yourselfers ask themselves when they are researching laminate floors. A floating floor is basically a floor that is not nailed down or glued down to the sub floor.

There are several benefits of having a floating floor as opposed to a secured floor. First you can install it over the top of another flooring material like linoleum or concrete. This will help cut down on the amount of time spent on its installation. Another great advantage of using a floating floor is that you can reduce the amount of squeaks and creaks that your floor develops over time. Squeaks are created by loose nails rubbing against wood. By eliminating the flooring nails you are eliminating the source of the squeaks. Floating floors are also easier to install than secured floors. In most cases you can just snap together your floating laminate floor. This too will help reduce the amount of time needed to install your laminate floor.

Installing a floating floor starts by creating a level surface. This process may include sanding down the existing floor or removing the carpet. Next you will need to put down a vapor shield, if you are installing the floating floor over a cement sub floor, and by putting down the underlayment. After your underlayment has been taped down you will want to start installing your floating floor. To do this, simply snap the pieces together following the instructions that came with the floor planks.

Is laminate wood flooring right for you? Find out more at LaminateFloorsCheap.com - your source for information on installing laminate floors, do it yourself floor care information and professional flooring advice. For more home decor and remodeling options visit the home and garden directory.

Article Source: http://EzineArticles.com/?expert=Sarah_Freeland

Can You Wax Bamboo Floors?

All bamboo floors on the market come with a surface finish, with ceramic and aluminum-oxide being very popular for its scratch resistance and durability. As with hardwood floors, mixing surface finishes with wax finishes is not an option, but does it make it impossible to use wax on a bamboo floor?

The common answer would be, don't use wax if you can afford to maintain and recoat a surface finish. Another advice you will often hear is, never use wax on top of the surface finish. It's all valid, of course, but depending on the type of bamboo floor, you can actually use wax if you really must do so, but it's not as straightforward as you might have imagined.

It takes as much as sanding off the original finish and refinishing the floor with wax. It's the same procedure that is followed for wood floors. Keep in mind that once done, you are unlikely to be able to switch back to a surface finish ever again. The wax seeps into the bamboo and layers underneath, so even a thorough resand on a solid bamboo floor might not remove all the wax.

Another issue is that once you go the wax way, you will have to rewax and buff the floor regularly to keep it in top condition, just like with a wood floor. A factor that may deny you the chance to switch to a wax finish is the type of bamboo flooring. Sure, solid floors are always good candidates, but with the special chemicals and processes used in the making of some strand woven and engineered bamboo floors, you'd be better off asking the manufacturer for advice. I won't even mention the expensive hand scrapped floors who require completely specialized sanding and refinishing if you're to keep their original look.

When it comes to visual appearance, you will most likely notice a change, especially to a natural bamboo floor. Carbonized floors color may be less affected, but it depends on the level of carbonization and the wax brand you're going to use.

As you might have guessed it, once wax goes in contact with the floor, your warranty would be void and gone. Take serious consideration before taking such a decision and if there's any chance to avoid the use of wax, please do so.

Tag : floor,bamboo floor,hardwood floor,floor tiles

Article Source: http://EzineArticles.com/?expert=Hristo_I.

How To Install Bamboo Flooring Over A Wood Sub-Floor

Please note, because of the differences in installation methods, this article covers installation over a wood sub-floor. This article also assumes you have selected your grain and color of flooring.

Tools Required:

1. Chalk Line

2. Rubber Mallet

3. Hand Saw

4. Plastic or Wooden Spacers (1/4”)

5. Pneumatic Flooring Package (air compressor and hose, gun mallet and staples)

Note: This package can be rented at most rental centers. Make sure you get the correct staples for the gun. The staples may look alike, but it is important to get the proper gauge that fits the gun.

Preparation:

Remove shoe moldings and make sure the sub-floor is even, clean, dry and smooth. Sanding may be necessary in order to obtain smooth, even surface. If sanding is needed, make sure the floor is completely cleaned of dust and debris afterward. Also, if you notice any floor squeaks, correct them now by securing the sub-floor to the joists as needed. Door jambs may also need to be cut so planks will fit under them to create a finished look. Simply place a piece of flooring against the jamb, mark it and cut the jamb at the line.

Once you have received your flooring, it must first be allowed to acclimate itself in the room in which it will be installed. Flooring should be removed from its boxes and stored in the room it will be installed in for a minimum of two days, preferably three to five days before installation. This will let the floor adjust to the room’s humidity and temperature. Because of natural variations in the flooring, it is recommended you layout the planks to get an idea of how you want them arranged before making any cuts or nailing any boards down.

Installation:

It is recommended that you install flooring parallel with the longest wall of the room for the best visual effect. Measure the width of a plank from this wall and add 1/4” to the measurement. Next, at this spot, snap a chalk line across the room to mark where you will begin flooring. This 1/4” is important to provide expansion/contraction room for the flooring.

Arrange the first row with the groove for the flooring facing the wall. Also, begin placing spacers between the flooring and the wall. Spacers should be inserted approximately every 12 inches and at each joist. This gives you a firm base to install against, but ensures you maintain your 1/4” gap. This starter row should be nailed to the flooring joists underneath the sub-floor. The edge of the flooring which faces the wall (groove edge) may be face nailed since it will be covered by shoe molding after installation. The other edge should be secured by blind nailing with the pneumatic gun approximately every ten inches, no closer than 6 inches. Also avoid nailing to close to the end of a board to avoid splitting the board.

As you begin your next row, make sure your board joints are staggered. In other words, no two ends of adjacent rows should meet. You can achieve this by cutting off 6-8 inches of the first board in your next row. This varying board length is not only for visual effect, but is also essential so as not to weaken the floor.

Tip: Make sure you match tongue to groove as you lay each row. Otherwise you will create very unsightly gaps and an uneven floor. Also, use a scrap piece of floor braced against the piece you are installing and tap against the scrap piece with the rubber mallet to work the flooring into place.

On the last row, blind nailing by hand will be necessary since the pneumatic gun will not fit. As a last resort, the last row can be face nailed in lieu of blind nailing.

Finishing Up:

Once all the flooring is has been laid, replace the shoe moldings and give the floor a final sweep up. Now it’s time to bring back in furniture, rugs, etc. and your room remodel is complete.

Published At: Isnare Free Articles Directory http://www.isnare.com
Permanent Link: http://www.isnare.com/?aid=23398&ca=Home+Management

Installing Ceramic Tile Floor

While carpets, vinyl and laminates are fine, for a beautiful looking floor you should consider installing a ceramic tile floor. Learning how to install ceramic floor tile can be a fun project, especially for people who love the do it yourself jobs at home. The history of ceramic goes back over thousands of years and it is a very old craft that humans have been doing for a centuries.

Installing a ceramic tile floor does not take a very long time and if you ask a professional ceramic layer, they can tell you that the process of preparing an area is very important, which is why it is the longest part of the project. Make a plan and cut the pieces before you begin the task of installing ceramic tile floor. It can be frustrating at times but after you learn how to install ceramic floor tile, the job will be much easier and the finished results will look spectacular.

The first thing that you should do before installing ceramic tile floor is to remove every item and furniture that you possibly can. You want the room cleared completely so that you can have access to the entire floor. If you are tiling the kitchen floor, all of the standing appliances will need to go and this includes the stove, refrigerator, dishwasher and oven. For a bathroom you will need to take out the wall molding, toilets and sinks. You want the tile to fit every where in one seamless motion.

If your floor already has vinyl on it, you will need to have it cut up and tossed away. The adhesive of the vinyl will also need to be removed and you can scrape it or give it a good sanding to make the floor level and even. A great substrate to use for a tile laying project is sheetrock but when tiling a kitchen or bathroom, you should consider using backer boards because it will last longer in moist areas.

The center of any room is the best spot for a spectacular layout, so you should begin to measure and create your floor plan. Try not to have cuts that are too thin around the rooms' border. Be aware that you need to leave room and spaces for the grout when it is added later on.

The process of laying down tiles can be the most time consuming. You should have a space holder that is made of rubbed so that it can show where the grout will be added. A pattern should begin to form once you have laid down a few tiles. Check the height and width of the area so that you can see if you will need to add a little more space for any grout and mastic.

As you complete the tile cutting, feel free to waste a few tiles if necessary while you trim a few of the pieces. You want the layout to be perfect before you start to add the mortar, so everything should look the way you want it to before you move on.

Pick up a few tiles at a time and evenly smooth the mortar onto the backs of them. Use a bit of pressure to lay the tiles in place is you take away the rubber spacers. Repeat this process until all of the tiles have been put into place. Move as quickly as you can because you do not want the mortar to dry while you are still working.

When everything is fit into place and you are happy with the design, you will need to get grout into the spaces around the tiles. Use as much force as you can to get all of the gaps and spaces filled. Using a sponge that can remove grout and adding some water, you can then clean the tops of the tiles. It will take roughly an hour and it should be done quickly before the mortar has time to harden.

Using caulk, move around the edge of the room to seal the outer areas between the tiles and the wall. If everything is as it should be, furniture and items can be put back into the room.

Published At: Isnare Free Articles Directory http://www.isnare.com
Permanent Link: http://www.isnare.com/?aid=229749&ca=Home+Management

Engineered Wooden Flooring Vs Solid Wood Flooring

Engineered Wooden Flooring

Engineered floor boards come in a wide range of styles and designs, from rustic grains to tranquil floors with uniform patterning and everything in between! These boards can be laid on either a wood sub-floor or on cement. An uneven floor will be leveled prior to installation so that the floor is laid evenly. A special high quality foam underlay, with built in moist barrier, reduces creaking, movement and sound transmission.

So what is the advantage of engineered wooden Flooring?

-Relatively quick installation with minimal fuss, mess, smells or dust.

-Floor can be placed on most surfaces.

-Surface is pre-finished and needs no sanding or sealing once lay.

-Your new floor is usable straight away.

-Completely sealed surface eliminates smells, smoke and fumes from lower levels choice of lacquered or oiled finish

-Easily resurfaced and sealed

Solid wood flooring

Solid wood flooring comes in many varieties of wood, widths, thickness and colors to suit almost any requirement. Solid wood flooring is surface nailed onto joists or a quality sub-floor, but can also be glued onto a concrete or wood sub-floor with plenty of allowance for wood expansion. With the proper care and attention, your solid wood floor will last a lifetime.

The advantages of a solid wood floor are:

-Huge selection to choose from antique to modern

-Very flexible to create the exact look your require

-Random widths for extra character and individuality

-Un-finished boards can be treated on site to your color requirements

-Pre-finished boards easy and quick to fit and are usable straight away

-Easily refurbished and sealed

Floordealersoncall is a free service that enables you to fill out a flooring request form that then will be submitted to multiple local flooring companies. A representative will contact you with their best offer and possible recommendations. Get your Free Flooring Quote today.

Article Source: http://EzineArticles.com/?expert=Sean_Ansari

How To Care For A Hardwood Floor

Hardwood floors are an excellent investment for any home, promoting resale value and interior warmth. However, if the floors are not properly cared for, this investment won’t yield as well. Hardwood floors are not hard to maintain, and compared with carpet and other surfaces that are more difficult to clean or require replacement, hardwood floors can be considered relatively low maintenance. But proper care is essential to keep the floors in good shape, and to give them a nice shine.

As with all flooring, hardwood floors must be cleaned, but they must be cleaned correctly. The correct way to clean urethane-stained floors is to mop them with a damp mop. Using vacuum and bristle brooms daily will help keep the floor clean. But when it comes time to really clean the floor, use a damp mop. Allowing dirt and grime to collect on the floor, and walking on this grime over as period of time can damage the finish. Using a small amount of water shouldn’t hurt the finished wood, but don’t pour out water and mop it like you would with kitchen tile. A damp mop or dust rag is all that should be needed, and it should be light enough in water that it will dry in minutes. Be sure to understand what type of finish your floor has, and what the suggested cleaning methods are. Using soaps and oils can void manufacturer warranties on many floors.

Another way to protect hardwood floors is to use throw rugs or walk-off mats in areas of high traffic. For example, in the entry way where people come in through the house, the traffic is likely to be greater in an isolated spot, and thus the floors will wear unevenly in this spot. This would make a great place for an area rug. Watch your floors over time, and consider putting some sort of rug or other type of protection on areas that receive more wear. It is especially important to use rugs on wood floors in kitchens in front of sinks and stoves.

Floor protectors on the bottom of furniture is highly recommended. You will want to pay special attention to rolling chairs with rubber wheels like those often found in offices. These chairs have a tendency to leave rubber trails on the wood floors. If you have such a chair, consider putting a rug underneath it.

There are two primary finishes on hardwood floors: urethane finishes and wax. You should never wax a urethane finished floor. If your urethane floor is extremely worn, you may need to refinish it which will involve sanding and applying sealer. However, if you clean the floor regularly, using only soaps recommended by the manufacturer, and you protect problem areas, you should avoid needing to refinish the floor for many years.

Wax floors require occasional waxing. It really isn’t a lot different than cleaning and waxing your car. You will need to clean the floors first, and buff areas that are worn with high traffic. Occasionally, you will need to buff on additional wax in the worn areas. With wax finished, just as with urethane finishes, you should know the manufacturers recommended care procedures.

With proper maintenance, your hardwood floors should last for the lifetime of your house, and look shiny and new for many years.

Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=45482&ca=Home+Management

Floor Your House With Finesse

Are you building your dream house? Or are you redecorating your house to bring it into the new millennium? Whether you are building from scratch, or giving your house a completely new revamp, nothing can ruin the overall look of a house than old-fashioned, out-dated floorings.

Many people tend to overlook the importance of their flooring, and instead get to the end of their project, only to scratch their head and wonder why things didn’t turn out the way they had imagined. Too often, it is not until the end of a job that people realize they have forgotten to invest in new floor coverings, and the whole effect of their interior decorating has been lost.

When you are building or redecorating, the type of floor covering that will be used in your house should be one of the first things you think about. Choosing the right floor covering can be an arduous task, since there are so many materials and styles around.

These days it is very fashionable to have polished wooden floors. Likewise, tiles and slate are very popular. All are beautiful materials to walk on, especially barefoot in summer! That said, you need to think about the climate that you live in, ease of cleaning and price. Wood, tiles and slate tend to be expensive, and if you live in a cool climate can be very cold. Be sure you have adequate heating because woods, tile and slate offer very little warmth.

If you are on a budget, there are literally hundreds of very stylish and functional vinyls on the market. Indeed, there are so many excellent vinyls nowadays that mimic polished wood that it is difficult to tell what is the real thing. Many people who opt for vinyl are pleased they did because it is heavy wearing, does not require polishing, re-sanding or re-lacquering, all of which saves money down the track.

Another budget friendly floor covering is cork. Lovely underfoot, warm and easy to lay, cork is a relatively cheap and easy to source material that comes in a variety of shades and styles.

Choosing the right floor covering for your needs depends on the level of usage, your individual decorating taste and your budget. Whatever floor covering you go for, be sure to think about this important decorating element early in the piece. Your floor can be the centerpiece of your house if you choose wisely.

Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=82758&ca=Home+Management

Engineered Hardwood Flooring Can Save Money Without Sacrificing Style

Hardwood floors are a look that never goes out of style. It is something that adds immediate value and class to your home. Of course, this new rich look is going to cost money, but there are ways to trim some of these costs, especially if you are going to do the installation yourself. One such measure is to use engineered hardwood flooring.

If you are thinking that engineered hardwood flooring is the laminated flooring that you sometimes see in restaurants, you are way off base. These are real wood planks that have already been finished and are ready for installation.

Two things that take up a lot of time when you install a floor are the sanding down and the staining and finish application. These are also the two areas that a lot of DIY'ers can make the most mistakes. Avoid wasting time and money by using the engineered hardwood flooring instead of the standard flooring.

Using this product also eliminates the need to hire a professional. If you have ever laid down flooring before, you should have some basic knowledge and can look on the internet for some quick lessons on the best way to lay down hardwood floors. Something else to consider is that you can use the floor right away instead of having to wait days for the finish to properly dry.

If you have an area of the house that you are going to be installing hardwood floors and it is prone to mild exposure to moisture, engineered hardwood flooring is a much better choice than standard hardwood floors. Because of the way it is treated, it is more likely to hold up to these conditions over say a Maple wood floor that you install and finish yourself.

When you are deciding how to install the floor, you can do it normally where the nails will show but be flush to the floor or you can choose to hide them since the floor is already finished and you do not want to risk harming the finish during installation. To do this, you will need to use a technique called blind nailing or even possibly gluing them down. Either way will allow you to keep the pristine look of the wood.

While this product itself will have a higher price tag on it than unfinished product, you need to take the time and error factors into consideration of the pricing. You are saving a ton of time and run no risk of messing up the finish and having to bur more wood or make costly repairs.

As you look at the small mistakes that can cost significant money in replacement or repair, engineered hardwood flooring starts to make more and more sense. Think about a bubble popping up because you didn't stir the solution properly. A small mistake, but it can cost you a lot of money when you do it. If you have little experience in this type of work you are better off playing it safe and using the prepared product to work with.

Article Source: http://EzineArticles.com/?expert=Sam_Lewis